The deep-seated slope deformation at Encampadana, Andorra: Representation of morphologic features by numerical modelling     

Marcel Hürlimann  Alberto Ledesma  Jordi Corominas  Pere C. Prat 《Engineering Geology》2006,83(4):343-357

  相似文献   

Editorial     

Raymond Michels  Laurence Mansuy  Marcel Elie  Pierre Faure  Vincent Huault  Luis Martinez  Jacques Pironon 《Organic Geochemistry》2002,33(12)

  相似文献   

Numerical Homogenization of the Rigidity Tensor in Hooke's Law Using the Node-Based Finite Element Method     

Zijl  Wouter  Hendriks  Max A. N.  't Hart  C. Marcel P. 《Mathematical Geosciences》2002,34(3):291-322

Combining a geological model with a geomechanical model, it generally turns out that the geomechanical model is built from units that are at least a 100 times larger in volume than the units of the geological model. To counter this mismatch in scales, the geological data model's heterogeneous fine-scale Young's moduli and Poisson's ratios have to be “upscaled” to one “equivalent homogeneous” coarse-scale rigidity. This coarse-scale rigidity relates the volume-averaged displacement, strain, stress, and energy to each other, in such a way that the equilibrium equation, Hooke's law, and the energy equation preserve their fine-scale form on the coarse scale. Under the simplifying assumption of spatial periodicity of the heterogeneous fine-scale rigidity, homogenization theory can be applied. However, even then the spatial variability is generally so complex that exact solutions cannot be found. Therefore, numerical approximation methods have to be applied. Here the node-based finite element method for the displacement as primary variable has been used. Three numerical examples showing the upper bound character of this finite element method are presented.  相似文献   

Correction to Roberts and Clemens (1995) “Feasibility of AFC models for the petrogenesis of calc-alkaline magma series”     

Malcolm P. Roberts  John D. Clemens 《Contributions to Mineralogy and Petrology》1997,128(1):97-99

  相似文献   

The identifiability of parameters in a water quality model of the Biebrza River, Poland   总被引：1，自引：0，他引：1  

Marcel van der Perk  Marc F. P. Bierkens 《Journal of Hydrology》1997,200(1-4):307-322

The identifiability of model parameters of a steady state water quality model of the Biebrza River and the resulting variation in model results was examined by applying the Monte Carlo method which combines calibration, identifiability analysis, uncertainty analysis, and sensitivity analysis. The water quality model simulates the steady state concentration profiles of chloride, phosphate, ammonium, and nitrate as a function of distance along a river. The water quality model with the best combination of parameter values simulates the observed concentrations very well. However, the range of possible modelled concentrations obtained for other more or less equally eligible combinations of parameter values is rather wide. This range in model outcomes reflects possible errors in the model parameters. Discrepancies between the range in model outcomes and the validation data set are only caused by errors in model structure, or (measurement) errors in boundary conditions or input variables. In this sense the validation procedure is a test of model capability, where the effects of calibration errors are filtered out. It is concluded that, despite some slight deviations between model outcome and observations, the model is successful in simulating the spatial pattern of nutrient concentrations in the Biebrza River.  相似文献   

How Important is Global Warming for Coastal Erosion?     

Marcel J. F. Stive 《Climatic change》2004,64(1-2):27-39

  相似文献   

Preliminary Characterisation of New Glass Reference Materials (GSA-1G, GSC-1G, GSD-1G and GSE-1G) by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry Using 193 nm, 213 nm and 266 nm Wavelengths   总被引：5，自引：1，他引：5  

Marcel Guillong  Kathrin Hametner  Eric Reusser  Stephen A. Wilson  Detlef Günther 《Geostandards and Geoanalytical Research》2005,29(3):315-331

New glass reference materials GSA-1G, GSC-1G, GSD-1G and GSE-1G have been characterised using a prototype solid state laser ablation system capable of producing wavelengths of 193 nm, 213 nm and 266 nm. This system allowed comparison of the effects of different laser wavelengths under nearly identical ablation and ICP operating conditions. The wavelengths 213 nm and 266 nm were also used at higher energy densities to evaluate the influence of energy density on quantitative analysis. In addition, the glass reference materials were analysed using commercially available 266 nm Nd:YAG and 193 nm ArF excimer lasers. Laser ablation analysis was carried out using both single spot and scanning mode ablation. Using laser ablation ICP-MS, concentrations of fifty-eight elements were determined with external calibration to the NIST SRM 610 glass reference material. Instead of applying the more common internal standardisation procedure, the total concentration of all element oxide concentrations was normalised to 100%. Major element concentrations were compared with those determined by electron microprobe. In addition to NIST SRM 610 for external calibration, USGS BCR-2G was used as a more closely matrix-matched reference material in order to compare the effect of matrix-matched and non matrix-matched calibration on quantitative analysis. The results show that the various laser wavelengths and energy densities applied produced similar results, with the exception of scanning mode ablation at 266 nm without matrix-matched calibration where deviations up to 60% from the average were found. However, results acquired using a scanning mode with a matrix-matched calibration agreed with results obtained by spot analysis. The increased abundance of large particles produced when using a scanning ablation mode with NIST SRM 610, is responsible for elemental fractionation effects caused by incomplete vaporisation of large particles in the ICP.  相似文献   

Possible spatial variability in the Selwyn Block of Central Victoria: evidence from Late Devonian felsic igneous rocks   总被引：2，自引：0，他引：2  

J. D. Clemens  M. A. Elburg 《Australian Journal of Earth Sciences》2016,63(2):187-192

The Neoproterozoic to Cambrian Selwyn Block in Central Victoria forms the mainly unexposed basement to the Paleozoic metasediments, granitic rocks and felsic volcanic complexes of the Melbourne Zone of the Lachlan Orogen. The Late Devonian felsic rocks are largely products of partial melting of the Selwyn Block, and their chemistry implies that their sources were most probably arc-related andesite, dacite, volcaniclastic greywackes and some pelites. When plotted against the median longitudes of the plutons and volcanic complexes, the average values for ⁸⁷Sr/⁸⁶Sr_t and ?Nd_t (at 370 Ma) reveal broad trends interpreted to reflect possible compositional and/or age structure in the Selwyn Block. Assuming that the trends are real, from W to E, I-type sources are progressively less crustally evolved, probably younging eastward. The S-type sources show no trend in ?Nd_t, suggesting that there was efficient sediment mixing. The ⁸⁷Sr/⁸⁶Sr_t values, however, become more evolved eastward (opposite in sense to the apparent variation in the I-type sources). This is interpreted as the original Selwyn Block sediments having been more pelitic eastward, perhaps suggesting a deepening of the basin in this direction, as well as structurally upward in the succession. The opposite senses of variation highlights the spatial separation of the S- and I-type sources and suggest that the granitic magmas here are unlikely to represent any sort of mixing continuum.  相似文献   

Development and Extension of An Aggregated Scale Model: Part 1 – Background to ASMITA     

Ian TOWNEND  Zheng Bing WANG  Marcel STIVE  Zeng ZHOU 《海洋工程》2016,(4):483-504

Whilst much attention has been given to models that describe wave, tide and sediment transport processes in sufficient detail to determine the local changes in bed level over a relatively detailed representation of the bathymetry, far less attention has been given to models that consider the problem at a much larger scale (e.g. that of geomorphological elements such as a tidal flat and tidal channel). Such aggregated or lumped models tend not to represent the processes in detail but rather capture the behaviour at the scale of interest. One such model developed using the concept of an equilibrium concentration is the Aggregated Scale Morphological Interaction between Tidal basin and Adjacent coast (ASMITA). In this paper we provide some new insights into the concepts of equilibrium, and horizontal and vertical exchange that are key components of this modelling approach. In a companion paper, we summarise a range of developments that have been undertaken to extend the original model concept, to illustrate the flexibility and power of the conceptual framework. However, adding detail progressively moves the model in the direction of the more detailed process-based models and we give some consideration to the boundary between the two.  相似文献   

An ecosystem-based composite spatial model for floodplain vulnerability assessment: a case study of Artigas,Uruguay     

Freitas  Gabriel  Díaz  Ismael  Bessonart  Martín  da Costa  Edwin  Achkar  Marcel 《GeoJournal》2021,86(3):1155-1171

Floods are natural processes that constitute a hazard to society when associated to improper land use. Anthropic activities in floodplains are a factor of vulnerability that converts a natural hazard into a threat factor, eventually leading to disaster. Nowadays, natural and social complex processes demand integrated assessments in order to improve their understanding, helping decision making over sustainable use of territory, as well as integrating society’s activity in ecosystems and potentials, restrictions and benefits that society obtain from them. In this context, the objective of this work was to build a composite vulnerability model for a floodplain under urban influence, using an integrated assessment approach. This model was based on three dimensions; threat, fragility and an ecosystem services provision. These dimensions were calculated using both primary and secondary information, and weights by specialists. Main results show that the area presents high vulnerability with an increasing gradient towards high and urbanized areas, associated with an important number and relevant ecosystem services. Also, a spatial heterogeneity of the three dimensions emerged, making evident this area’s complexity and the need of integrated assessments to approach it. The composite vulnerability model proposed presents an elevated potential for natural and social processes analysis in floodplains, which is crucial for these territory management. Moreover, these integrated dimensions could contribute to decision making in different levels, as well as generating important supplies for environmental management and land planning.

  相似文献